For Wireless Power Kit
- Connect wireless mobile power kit to splitter.
- Connect splitter to the mini Qi Coils.
- Turn your Wireless Powerkit Volume clockwise to Power ON.
- Enable Bluetooth by turning the switch from AUX to BTH.
- Pair with your Android device by going to Settings-> Bluetooth then select “Qi Coil Mobile”.
- Open the Qi Coil App.
- Play the testing frequency.
- Turn up the volume on your device to maximum.
- Turn on the mobile power kit volume to maximum.
- Hold the gold magnet and get it close to the Qi Coil to test for vibrations.
- Alternatively. Hold the small magnet in the plastic jar close to the Qi Coil to test for magnet movement.
For Resonant Power Kit
- Connect Resonant Console to splitter cable.
- Connect one end of the splitter to the Speaker (Line In Port).
- Connect the other end of the splitter to Resonant Power Kit via RCA cable. Red Jack goes to Red Port and White Jack connects to White Port.
- Connect Qi Coil Max to the Banana Plugs with an Auxilliary Cord.
- Plug the Red Audio Jack to the red post and the black Audio jack to the black post.
- Connect the Power Cable to the Amplifier and to a power outlet. Turn it on.
- Open the Qi Coil App and play the testing frequency.
- Turn up the volume on your speaker to maximum. (Rotate clockwise gesture on your DOSS Speaker)
- Hold the gold magnet and get it close to the Qi Coil to test for vibrations.
- Alternatively. Hold the small magnet in the plastic jar close to the Qi Coil to test for magnet movement.
- Test if speaker is working. Play "Remove Negative Energy" frequency on the app.
- You should be able to hear sounds coming from the speaker.
- Qi Coil not working? Check mobile power kit is charged, or connect it to a USB port with the USB cable.
- Speaker not working? Check if the speaker is fully charge or connected properly in the splitter and mobile power kit.
Category: Méditation et arts martiaux
Utilisez les flèches gauche/droite pour naviguer dans le diaporama ou balayez vers la gauche/droite si vous utilisez un appareil mobile
- le choix d'une sélection entraîne une actualisation complète de la page
- appuyez sur la touche espace puis sur les touches fléchées pour faire une sélection